J3P — The Plays

Click any play → the setup chart, the play in numbered steps, and one line telling you exactly what to do. Specs & code in the drawer. Ranked by out-of-sample strength. · cheat sheet · hub
Chart key: VWAP + dashed ±1σ/±2σ bands · green/red candles = price (with real wicks) · numbered blue dots 1..4 = the phases of the setup in order · ● ENTRY · dashed red STOP · dashed green targets. Idealized schematics (the shape the code looks for), not real bars.
vwap_reject_shortSHORTPrice is below VWAP (downtrend). It pops UP to VWAP but fails and closes back under. You short the failure.STRONG OOS
+2σ+1σVWAP−1σ−2σSTOPT1 −2σT2 −4σ1234ENTRY
1below VWAP, downtrend→2pops up, tags VWAP→3rejects, closes back below → SHORT→4falls to −2σ / −4σ
▶ DO: SHORT the VWAP-loss close · stop above the pop · cover the fade into −2σ / −4σ (mean-revert)
🔍 Full detail — specs · management · code

Exact specs

  • Context: price below session VWAP, down-context (VWAP slope ≤ 0 OR price below the 2-day AVWAP).
  • Trigger: this bar CLOSES back below VWAP after the prior bar was at/above it (a cross-down), sitting in the VWAP→−1σ zone with −2σ below the close.
  • Entry = the VWAP-loss close · Stop = above the shakeout high / 2-day AVWAP +0.25·ATR · T1 = −2σ (60%) · T2 = −4σ (20%) · runner covers into VWAP.

Management plans (pick by context)

Plan A — cover the fade (default): Cover into the −2σ target — a mean-reversion short, so bank it. Stop above the recent high / a reclaim of VWAP.
Invalidation: Reclaim of VWAP (the short is wrong). · +0.19 practice / +0.11 fresh — the one short that held OOS
Plan B — topping-short trail (multi-day): If it's a multi-day top losing its daily MAs, take partial at −2σ and TRAIL the falling 20-day down (the MU / AMZN swing case). Add only on failed retests of the falling MA.
Invalidation: Reclaim of the falling 20-day. · MU 7/2 short rode toward the 50-DMA — see the Swing-DMA page

How it's implemented (from the scan code)

cross_dn = (r.close < r.vwap) and (p.close >= p.vwap)      # loses VWAP from above
below_multi = (avwap2 is not None) and (r.close < avwap2)
down_ctx  = (r.vwap_slope <= 0) or below_multi
value_zone = (r.close >= r.lb2) and (r.close <= r.vwap)    # VWAP→−1σ
sigma_below = r.lb3 < r.close                             # −2σ below close
if cross_dn and down_ctx and value_zone and sigma_below:
    entry = r.close; stop = shake_high + BK_STOP_BUF*atr
    t1 = r.lb3; t2 = r.lb5
revbreak_longLONGPrice is falling. It breaks its downtrend, pulls back to test the breakout level, holds, then goes. You buy the turn.STRONG OOS
+2σ+1σVWAP−1σ−2σSTOPT1T21234ENTRY
1downtrend→2breaks the trend up→3pulls back, retests the break→4holds → BUY, runs
▶ DO: BUY the retest-and-go · stop under the retest low · ride the 20-EMA (the band is target #1)
🔍 Full detail — specs · management · code

Exact specs

  • Context: an intraday downtrend (a real down-leg below the recent resistance).
  • Trigger: price breaks ABOVE the prior resistance in the last few bars, then this bar pulls back to RETEST that level and closes back above it (an up bar) — the retest holds.
  • Entry = the retest-and-go close · Stop = below the retest low −0.1·ATR · T1 = entry +1.5·ATR · T2 = entry +3·ATR · trend-trail the runner.

Management plans (pick by context)

Plan A — EMA ride (default): Ride the whole position. After the +2σ band tags, move the stop to BREAKEVEN; exit 100% on the first 2-min close back through the 20-EMA.
Invalidation: Close under the 20-EMA once trending (or the initial stop before that). · +$1,471 per 100 — ride-all beat cap-at-band ~7× (fresh data)
Plan B — 1/3 partial + ride: Take 1/3 off at the +2σ band, move the stop to breakeven, ride the other 2/3 to the 20-EMA break. Smoother, higher hit-rate, a bit less total.
Invalidation: Same 20-EMA break; the breakeven stop protects the runner. · +$879 per 100 (46% win vs 42%)
⛰ If it's running into a known CEILING (200-day, prior high, anchored VWAP, supply wall) → switch to momo-burst: sell 50–70% into the burst + MANDATORY trim at the ceiling (+5.22R on IBIT). Never hold for a target sitting in overhead supply.

How it's implemented (from the scan code)

resist = high[i-10:i-2].max()                     # prior down-leg resistance
dipped = low[i-8:i].min() < resist - 1.0*a         # a real down-leg happened
broke  = max(close[i-3],close[i-2],close[i-1]) > resist   # broke above it
retest = (low[i] <= resist+0.15*a) and (close[i]>resist) and (close[i]>open[i])
if dipped and broke and retest:
    entry=close[i]; stop=min(low[i-1],low[i])-0.1*a
    t1=entry+1.5*a; t2=entry+3.0*a
trend_rideLONGIn a clear uptrend, price pulls back to its fast average, then takes off again. You buy the continuation.STRONG OOS
+2σ+1σVWAP−1σ−2σSTOPT1 +2σT2 +4σ1234ENTRY
1uptrend (5>20>50)→2pulls back to 5-MA→3resumes → BUY→4continues up
▶ DO: BUY the pullback that resumes · stop under the pullback low · ride the 20-EMA
🔍 Full detail — specs · management · code

Exact specs

  • Context: up-regime — price > VWAP, VWAP rising, MAs aligned (5>20>50), already above +0.5σ.
  • Trigger: the prior bar pulls back to the 5-MA, then this bar breaks the pullback-bar high, closes up and above the 5-MA. RVOL ≥ 1.2.
  • Entry = the go bar's close · Stop = below the pullback low −0.1·ATR · T1 = +2σ · T2 = +4σ · trend-trail the runner.

Management plans (pick by context)

Plan A — EMA ride (default): Ride the whole position. After the +2σ band tags, move the stop to BREAKEVEN; exit 100% on the first 2-min close back through the 20-EMA.
Invalidation: Close under the 20-EMA once trending (or the initial stop before that). · +$1,471 per 100 — ride-all beat cap-at-band ~7× (fresh data)
Plan B — 1/3 partial + ride: Take 1/3 off at the +2σ band, move the stop to breakeven, ride the other 2/3 to the 20-EMA break. Smoother, higher hit-rate, a bit less total.
Invalidation: Same 20-EMA break; the breakeven stop protects the runner. · +$879 per 100 (46% win vs 42%)
⛰ If it's running into a known CEILING (200-day, prior high, anchored VWAP, supply wall) → switch to momo-burst: sell 50–70% into the burst + MANDATORY trim at the ceiling (+5.22R on IBIT). Never hold for a target sitting in overhead supply.

How it's implemented (from the scan code)

up_regime = (r.close>r.vwap) and (r.vwap_slope>0) and bool(r.ma_align)
established = r.close > r.ub1                        # already above +0.5σ
pulled_back = p.low <= p.ma5                         # prior bar tagged 5-MA
go = (r.close>p.high) and (r.close>r.open) and (r.close>r.ma5)
if up_regime and established and pulled_back and go and rvol>=1.2:
    entry=r.close; stop=min(p.low,r.low)-ATR_BUF_MULT*atr; t1=r.ub3; t2=r.ub5
band_breakLONGPrice sits calmly above VWAP, coils tight, then bursts up through the top band. You ride the pop.weak OOS
+2σ+1σVWAP−1σ−2σSTOPT1 +2σT2 +4σ1234ENTRY
1coils above VWAP→2breaks the top band→3BUY→4pops up
▶ DO: BUY the band break · stop under the coil · ride it, trim on MA breaks
🔍 Full detail — specs · management · code

Exact specs

  • Context: a 5-bar coil HOLDING above VWAP (≥60% of closes above), range ≤ 2·ATR, prior bar still inside the coil (fresh).
  • Trigger: this bar closes decisively above the coil high (> coil-high +0.1·ATR), is an up bar, and closes at/above +0.5σ. VWAP rising, RVOL ≥ 1.2.
  • Entry = the breakout close · Stop = below the coil low −0.1·ATR · T1 = +2σ · T2 = +4σ · trend-trail the runner.

Management plans (pick by context)

Plan A — EMA ride (default): Ride the whole position. After the +2σ band tags, move the stop to BREAKEVEN; exit 100% on the first 2-min close back through the 20-EMA.
Invalidation: Close under the 20-EMA once trending (or the initial stop before that). · +$1,471 per 100 — ride-all beat cap-at-band ~7× (fresh data)
Plan B — 1/3 partial + ride: Take 1/3 off at the +2σ band, move the stop to breakeven, ride the other 2/3 to the 20-EMA break. Smoother, higher hit-rate, a bit less total.
Invalidation: Same 20-EMA break; the breakeven stop protects the runner. · +$879 per 100 (46% win vs 42%)
⛰ If it's running into a known CEILING (200-day, prior high, anchored VWAP, supply wall) → switch to momo-burst: sell 50–70% into the burst + MANDATORY trim at the ceiling (+5.22R on IBIT). Never hold for a target sitting in overhead supply.

How it's implemented (from the scan code)

win=dt.iloc[i-K:i]; coil_hi=win.high.max(); coil_lo=win.low.min()
held=(win.close>win.vwap).mean()>=0.6; contained=(coil_hi-coil_lo)<=2*atr
fresh=p.close<=p_coil_hi
broke=(r.close>coil_hi+0.1*atr) and (r.close>r.open) and (r.close>=r.ub1)
if held and contained and fresh and broke and r.close>r.vwap and r.vwap_slope>=0 and rvol>=1.2:
    entry=r.close; stop=coil_lo-ATR_BUF_MULT*atr; t1=r.ub3; t2=r.ub5
open_driveLONGIn the first hour, price squeezes into a tight (inside) bar, then breaks out upward. You buy the breakout.weak OOS
+2σ+1σVWAP−1σ−2σSTOPT1 +2·ATRT2 +4·ATR1234ENTRY
1inside / coil bar→2breaks up→3BUY (open window)→4drives up
▶ DO: BUY the inside-bar break (open only) · stop under the range · ride the 20-EMA
🔍 Full detail — specs · management · code

Exact specs

  • Window: OPEN only (before 10:30 ET).
  • Trigger: the prior bar is an inside bar (its high < the bar-before's high AND its low > that low); this bar breaks and closes above the inside-bar high, close > VWAP, up bar. RVOL ≥ 1.5.
  • Entry = the breakout close · Stop = under the inside-bar low −0.1·ATR · T1 = entry +2·ATR · T2 = entry +4·ATR.

Management plans (pick by context)

Plan A — EMA ride (default): Ride the whole position. After the +2σ band tags, move the stop to BREAKEVEN; exit 100% on the first 2-min close back through the 20-EMA.
Invalidation: Close under the 20-EMA once trending (or the initial stop before that). · +$1,471 per 100 — ride-all beat cap-at-band ~7× (fresh data)
Plan B — 1/3 partial + ride: Take 1/3 off at the +2σ band, move the stop to breakeven, ride the other 2/3 to the 20-EMA break. Smoother, higher hit-rate, a bit less total.
Invalidation: Same 20-EMA break; the breakeven stop protects the runner. · +$879 per 100 (46% win vs 42%)
⛰ If it's running into a known CEILING (200-day, prior high, anchored VWAP, supply wall) → switch to momo-burst: sell 50–70% into the burst + MANDATORY trim at the ceiling (+5.22R on IBIT). Never hold for a target sitting in overhead supply.

How it's implemented (from the scan code)

is_inside = (p.high<p2.high) and (p.low>p2.low)     # inside/coil bar
broke = r.high>p.high and r.close>p.high
if mins<OPEN_END and is_inside and broke and r.close>r.vwap and r.close>r.open and rvol>=RVOL_THRESH:
    entry=r.close; stop=p.low-ATR_BUF_MULT*atr
    t1=entry+2*atr; t2=entry+4*atr
vwap_pull_inLONGPrice dips just under VWAP, then closes back above it. You buy the recovery into value.weak OOS
+2σ+1σVWAP−1σ−2σSTOPT1 +2σT2 +4σ1234ENTRY
1dips below VWAP→2recaptures VWAP→3BUY (value zone)→4to +2σ / +4σ
▶ DO: BUY the VWAP recapture · stop under the shakeout · ride to +2σ / +4σ
🔍 Full detail — specs · management · code

Exact specs

  • Context: VWAP slope ≥ 0.
  • Trigger: price CLOSES back above VWAP after the prior bar was at/below it (a cross-up), sitting in the VWAP→+1σ value zone with +2σ above the close.
  • Entry = the recapture close · Stop = below the shakeout low −0.1·ATR · T1 = +2σ (60%) · T2 = +4σ (20%) · runner trailed.

Management plans (pick by context)

Plan A — take the target (default): Mean-reversion: there's no trend to ride, so take the +2σ target. Stop below the shakeout low; move to breakeven after the first partial.
Invalidation: Loss of the entry level / the shakeout low. · marginal edge — bank it, don't hold

How it's implemented (from the scan code)

cross_up = (r.close > r.vwap) and (p.close <= p.vwap)     # recaptures VWAP
recapture = cross_up and (r.vwap_slope>=0) and (r.ub3>r.close) and (r.close<=r.ub2)
if recapture:
    entry=r.close; stop=r.shake_low-ATR_BUF_MULT*atr
    t1=r.ub3; t2=r.ub5
v_bottomLONGPrice drops hard to the bottom band, then snaps back up in a “V.” You buy the rebound.no OOS
+2σ+1σVWAP−1σ−2σSTOPT1 VWAPT2 +1σ1234ENTRY
1flush to −2σ→2V-turn (5-MA up)→3reclaims → BUY→4to VWAP
▶ DO: BUY the V-reclaim, small · stop under the V low · T1 = VWAP (mean-revert, don't chase)
🔍 Full detail — specs · management · code

Exact specs

  • Context: a real flush — the last ~5 bars' low reaches ≤ −2σ.
  • Trigger: the 5-MA slope turns UP (a V), and this bar closes back above the 5-MA on an up bar, still ≤ +0.5σ (not extended). No RVOL gate — the reclaim is a quiet bar.
  • Entry = the reclaim close · Stop = below the V low (3-bar) −0.1·ATR · T1 = VWAP · T2 = +1σ · runner trailed.

Management plans (pick by context)

Plan A — take the target (default): Mean-reversion: there's no trend to ride, so take the VWAP, then +1σ target. Stop below the shakeout low; move to breakeven after the first partial.
Invalidation: Loss of the entry level / the shakeout low. · marginal edge — bank it, don't hold

How it's implemented (from the scan code)

flushed = dt.low[i-5:i+1].min() <= r.lb3            # ≤ −2σ capitulation
ma5_vturn = (r.ma5>p.ma5) and (p.ma5<=p2.ma5)       # 5-MA slope turns up
reclaim = (r.close>r.ma5) and (r.close>r.open)
if flushed and ma5_vturn and reclaim and r.close<=r.ub1:
    entry=r.close; stop=v_low-ATR_BUF_MULT*atr; t1=r.vwap; t2=r.ub2
backside_rollSHORTPrice is stretched way above VWAP and slowly rolls over, losing its rising average. You short the fade back to VWAP.no OOS
+2σ+1σVWAP−1σ−2σSTOPcover at VWAP1234ENTRY
1extended above VWAP→2rolls over→3loses 5-MA → SHORT→4fades to VWAP
▶ DO: SHORT the lost 5-MA when extended · stop above the high · COVER at VWAP (fade)
🔍 Full detail — specs · management · code

Exact specs

  • Context: extended ≥ 2·ATR above VWAP, and the 5-MA had been rising (vs 3 bars ago).
  • Trigger: price just LOST the 5-MA (crossed below it) on a down bar. RVOL ≥ 1.0.
  • Entry = the close · Stop = above the recent high +0.25·ATR · Exit = cover 100% at VWAP (a mean-reversion fade — do NOT trend-trail).

Management plans (pick by context)

Plan A — cover into VWAP (default): Backside fade: cover into VWAP (the mean). Stop above the recent high + buffer. A scalp — take it.
Invalidation: Push back above the recent high. · not durable OOS — smallest size, quick

How it's implemented (from the scan code)

extended = (r.close-r.vwap) >= BK_EXT_ATR*atr
ma5_rising = r.ma5 > dt.iloc[i-3].ma5
lost_5 = broke_5 or (p.close>=p.ma5 and r.close<r.ma5)
if extended and ma5_rising and lost_5 and (r.close<r.open) and rvol>=1.0:
    entry=r.close; stop=r.recent_high+BK_STOP_BUF*atr; tgt=r.vwap
backsideSHORTPrice stretches far above VWAP and slaps down with a rejection candle. You short the snap-back to VWAP.no OOS
+2σ+1σVWAP−1σ−2σSTOPcover at VWAP1234ENTRY
1≥2σ extended→2rejection candle→3SHORT→4snaps to VWAP
▶ DO: SHORT the rejection candle when extended · stop above the high · COVER at VWAP (fade)
🔍 Full detail — specs · management · code

Exact specs

  • Context: extended ≥ 2·ATR above VWAP, 5-MA rolling over (or just lost).
  • Trigger: a rejection candle — took the prior 5-bar high, closed down, and closed in the lower 40% of its range. RVOL ≥ 1.5.
  • Entry = the close · Stop = above the recent high +0.25·ATR · Exit = cover 100% at VWAP (mean-reversion fade).

Management plans (pick by context)

Plan A — cover into VWAP (default): Backside fade: cover into VWAP (the mean). Stop above the recent high + buffer. A scalp — take it.
Invalidation: Push back above the recent high. · not durable OOS — smallest size, quick

How it's implemented (from the scan code)

extended = (r.close-r.vwap) >= BK_EXT_ATR*atr
rej = (r.high>=r.recent_high_prev and r.close<r.open
       and r.close < (r.high-(r.high-r.low)*0.4))   # rejection candle
if extended and (ma_roll or broke_5) and rej and rvol>=RVOL_THRESH:
    entry=r.close; stop=r.recent_high+BK_STOP_BUF*atr; tgt=r.vwap
Generated by j3p_plays_page.py. Specs/code mirror j3p_tod_scan.py + revbreak.py. OOS ranks from the 90-day SIP backtest. 2026-07-05.