# VWAP Pull-In Quality Gate — Cheatsheet

**Source:** [VWAP_PULL_IN_QUALITY_GATE.md](./VWAP_PULL_IN_QUALITY_GATE.md) (full doc) · [Diagnostic](./VWAP_PULL_IN_SPLIT_DIAGNOSTIC.md) (data)
**Use:** Print this. Refer pre-market and before every Pull-In entry.

> **Mechanism caveat (2026-06-04):** The slug `vwap-pull-in -> trend` is currently outcome-based, not mechanism-confirmed. Read it as "profitable Pull-In with wide exit," NOT automatically as "true trend conversion." First 5-minute post-entry behavior determines management: expansion + slope acceleration = possible trend conversion; flat band + flat slope = rotation scalp; opposite state/slope = wrong-side escape. ([audit](./PULL_IN_TO_TREND_MECHANISM_AUDIT.md))

---

## The rule

> **Plain VWAP Pull-In is only a clean setup in calm, controlled tape; in hot tape, it must either be managed for trend conversion or be passed.**

---

## The Gate

| 🟢 GREEN — TAKE | 🟡 YELLOW — CAUTION | 🔴 RED — STOP |
|---|---|---|
| RVOL **1.0–1.5** AND gap **< 0.5%** AND MTF grand **> 25** | RVOL **1.5–2.5** OR gap **0.5–1.5%** | RVOL **> 2.5** OR gap **> 1.5%** OR symbol in **{IBIT, AMD, ETHU, RGTI}** OR entry **< 10:00 ET in hot tape** |
| Normal Pull-In allowed. **Hold for trend conversion at +2 SD** — do NOT scratch at +1 SD. | Reduced size only. Take ONLY if structure is clean AND you can articulate the trend-conversion thesis BEFORE entry. | **Do NOT treat as plain Pull-In.** Reclassify (see below) or pass. |

---

## Pre-trade checklist — 7 questions

Before clicking buy, answer all 7 out loud:

1. **RVOL?** → target 1.0–1.5; **>2.5 = STOP**
2. **Gap %?** → target <0.5%; **>1.5% = STOP**
3. **First-hour emotional tape?** (09–10 ET + hot RVOL = double-strict)
4. **Controlled around VWAP, or hot expansion?** (controlled = OK; expansion = manage for trend or pass)
5. **Evidence it can convert to trend?** (HH+HL, MTF grand >25, +2 SD reach achievable)
6. **Really a plain Pull-In, or am I chasing?** (if you hesitate, you're chasing)
7. **If it fails to convert, where do I exit?** (LB1 / VWAP / time stop — pick BEFORE entry)

**If you can't answer 1–7 quickly: pass.**

---

## If hot tape (🟡/🔴), reclassify as…

| What the tape shows | Real setup name | Different rules |
|---|---|---|
| HH+HL after +2 SD close; entering on pullback to +1 SD; VWAP slope rising | **Pull-In → Trend / Trend Trade** | Stop = VWAP, target = +4 SD, **hold the core** |
| Extended >2 SD from VWAP avg, no setup, momentum chase | **Chase / Extended** | NOT an edge (net flat). **Pass.** |
| At intraday/HTF range edge, volume building toward edge | **Range Break / Hitchhiker** | Wait for the break, stop outside the consolidation |
| Extended ≥2.5 SD BELOW VWAP, double-bottom failure forming | **Rubberband / Backside Long** | Stop = −2 SD band, exit at VWAP, no trailing |
| Can't honestly name it in calm-tape Pull-In terms | **Pass.** | The setup doesn't exist on this name today |

**Rule of thumb:** if the only honest label is *"I want to be in this stock right now"* — **that's a chase, not a Pull-In. Pass.**

---

## Tomorrow's action rule

1. **Pre-market:** list watchlist symbols. For each, note RVOL projection and gap %.
2. **At 09:30 ET:** recheck the live RVOL and gap on each watchlist symbol. Any green-tape Pull-Ins?
3. **If GREEN:** enter with the trend-conversion management plan (hold for +2 SD, do NOT scratch at +1 SD).
4. **If YELLOW:** reduced size, only with clean structure + trend conversion thesis stated out loud.
5. **If RED:** do not click "Pull-In." Either reclassify (table above) or pass.

---

## Post-entry management (first 5 minutes — mechanism-aware)

Once in the trade, the **first 5 minutes** reveal the actual mechanism. Manage to what the tape is doing, not to the slug name:

- **Band width EXPANDS AND slope ACCELERATES in direction:** manage as **possible trend conversion** — trail wide, hold the core.
- **Band width FLAT AND slope near zero:** manage as **VWAP rotation scalp** — target the band, take the rotation, don't extend stops.
- **Slope or state moves AGAINST direction:** **exit or reduce quickly** — wrong-side trade.
- **Don't blindly hold** because the trade later gets labeled `vwap-pull-in -> trend`. That label is post-hoc; it doesn't validate the management decision you made at minute 5.

---

## Symbol watchlist (review before entering plain Pull-In)

These 4 symbols carried **-$360 of the -$364 total plain Pull-In loss** over the sample window. **Treat as RED tape by default; require RVOL <1.5 AND gap <0.5% AND clean conversion thesis before plain Pull-In.**

- **IBIT** (-$185, 10 trades, 30% WR)
- **AMD** (-$70, 3 trades, **0% WR**)
- **ETHU** (-$69, 3 trades, **0% WR**)
- **RGTI** (-$36, 2 trades)

---

## First-hour warning

09:00–10:00 ET held **91 of 127 plain Pull-In trades** and **-$401 of P&L** in the sample window. Same hour, PI → Trend was +$253 at 100% win rate (n=11). The hour isn't the problem; **selection within the hour** is. In this window, apply Rule R5: require RVOL <2 AND gap <1%. Otherwise pass.
